The Factors of Hydraulic Hose Damage

Are you looking for a Hydraulic Hose Shop in NJ? The Hose Shop operates 3 Hydraulic Hose Shops in NJ that have been serving local industries for decades.

Hoseshopinc.com

Hydraulic hoses are very important pieces of equipment. They help transport the hydraulic fluid, which in turn ensure that cools and components work as they should for long.

However, there are instances where these hoses can fail, and given their significance, the long term effects on the entire construction process could be rather extensive. With that in mind, here are some of the most prominent causes of hydraulic hose damage:

1. Tube ErosionThe erosion of a hydraulic tube could cause some significant external damage. In turn, tube erosion is caused by a concentration of high-velocity fluids, as well as the presence of particles in the fluid itself.Tube erosion can be prevented by getting hydraulic tubes which are properly suited for the recommended maximum velocities. The hose assembly should also not be bent too tight for flow, and the tube medium shouldn’t be too abrasive for the hose's inner tube.
2. Fluid CompatibilityIssues with fluid compatibility could also significantly cause external leakage and the contamination of the hydraulic hose system as well. Incompatible fluids will cause a deterioration of the hose assembly, thus leading to swelling. To prevent this, the solution really is simple; there must be verification to ensure that the fluid being conveyed is compatible with the hydraulic hose.
3. Wrong AssemblyA hydraulic hose assembly could be significantly disrupted by contamination. Whenever a hose is being cut, it is possible for debris and particles to settle in it without being effectively flushed. This abrasive debris could contaminate the entire hydraulic hose system. It could also go on to cause the appearance of small fractures in the inner tube, thus causing a terrible leakage.Prevention can be ensured by cleaning the hose before inserting the fittings in. After the fittings themselves are crimped, the ends must be capped in order to ensure that contamination doesn’t ensue while it is being transported.
4. Insertion Depth InaccuraciesA sub-par process of assembly could be rather detrimental. Fittings will need to be completely pushed, or at the very least meet the insertion depth requirements. If this insertion eth isn’t met, fittings could blow off, and the entire assembly would be compromised. A proper insertion depth can be ensured by marking the hose with insertion depth blocks. The blocks will help you see to it that the hose is pushed to the correct insertion requirements
5. Minimum Bend RadiusWhen a hose assembly doesn’t meet the minimum bend radius, the entire assembly could easily fail. Also, in suction or vacuum applications, exceeding the bed radius could lead to flat hoses in the bend area.

This will end up hindering flow, and in a case where the bend is severe enough, the hose might also kink. So, bend radii need to be properly checked. A hydraulic hose replacement could also be required, as well as changes to the length, routing, and fitting.

One stop to connect with the quality products you need, the service you deserve, and the technical knowledge we provide.

For more information about Hydraulic Hose Shop in NJ, Call The Hose Shop at 732-562-1000.
The Hose Shop - Your trusted Hydraulic Hose Shop in NJ.