The Hose Shop: October 2019

Monday, October 28, 2019

The Factors of Hydraulic Hose Damage

Are you looking for a Hydraulic Hose Shop in NJ? The Hose Shop operates 3 Hydraulic Hose Shops in NJ that have been serving local industries for decades.

Hoseshopinc.com

Hydraulic hoses are very important pieces of equipment. They help transport the hydraulic fluid, which in turn ensure that cools and components work as they should for long.

However, there are instances where these hoses can fail, and given their significance, the long term effects on the entire construction process could be rather extensive. With that in mind, here are some of the most prominent causes of hydraulic hose damage:

Tube ErosionThe erosion of a hydraulic tube could cause some significant external damage. In turn, tube erosion is caused by a concentration of high-velocity fluids, as well as the presence of particles in the fluid itself.Tube erosion can be prevented by getting hydraulic tubes which are properly suited for the recommended maximum velocities. The hose assembly should also not be bent too tight for flow, and the tube medium shouldn’t be too abrasive for the hose's inner tube.
Fluid CompatibilityIssues with fluid compatibility could also significantly cause external leakage and the contamination of the hydraulic hose system as well. Incompatible fluids will cause a deterioration of the hose assembly, thus leading to swelling. To prevent this, the solution really is simple; there must be verification to ensure that the fluid being conveyed is compatible with the hydraulic hose.
Wrong AssemblyA hydraulic hose assembly could be significantly disrupted by contamination. Whenever a hose is being cut, it is possible for debris and particles to settle in it without being effectively flushed. This abrasive debris could contaminate the entire hydraulic hose system. It could also go on to cause the appearance of small fractures in the inner tube, thus causing a terrible leakage.Prevention can be ensured by cleaning the hose before inserting the fittings in. After the fittings themselves are crimped, the ends must be capped in order to ensure that contamination doesn’t ensue while it is being transported.
Insertion Depth InaccuraciesA sub-par process of assembly could be rather detrimental. Fittings will need to be completely pushed, or at the very least meet the insertion depth requirements. If this insertion eth isn’t met, fittings could blow off, and the entire assembly would be compromised. A proper insertion depth can be ensured by marking the hose with insertion depth blocks. The blocks will help you see to it that the hose is pushed to the correct insertion requirements
Minimum Bend RadiusWhen a hose assembly doesn’t meet the minimum bend radius, the entire assembly could easily fail. Also, in suction or vacuum applications, exceeding the bed radius could lead to flat hoses in the bend area.

This will end up hindering flow, and in a case where the bend is severe enough, the hose might also kink. So, bend radii need to be properly checked. A hydraulic hose replacement could also be required, as well as changes to the length, routing, and fitting.

One stop to connect with the quality products you need, the service you deserve, and the technical knowledge we provide.

For more information about Hydraulic Hose Shop in NJ, Call The Hose Shop at 732-562-1000.
The Hose Shop - Your trusted Hydraulic Hose Shop in NJ.

Tuesday, October 22, 2019

Hydraulic Hose Repair

The cases for hydraulic hose repair

When it comes to construction equipment, there is perhaps nothing more important than hydraulic hoes. When a hose gets ruptured, the damage to productivity and efficiency that ensues is almost unmatched, and this means that investing just a little time in ensuring that a hose is in perfect condition can go a long way in reducing failures in the field.

If you ever need an argument in favor of the hydraulic hose repair (or in some cases, a total replacement), all you need to do is think about the potential cost of hose failure as regards environmental impact, loss in production, and possible injury to work operators.

So, in order to convince you to ensure that your hydraulic hose system is kept in proper shape, here is a picture of how it could help you in the long run.

Productivity enhancements

There is absolutely no question to it; a hydraulic system that is repaired and properly maintained will run much more effectively. There is also the fact that these maintained systems will require less energy to work with, and can even work for much longer (thus ensuring higher levels of productivity). When combined, all of these factors will undoubtedly lead to higher levels of production.

Staff versatility

When your site maintenance personnel keep spending their time on fixing broken systems and getting things to hopefully work optimally, then their productivity could be affected as well. The time spent on working with damaged hydraulic hoses could be better used on other profitable activities and responding to other issues that could arise on the site.

Inventory and parts control

The problem with faulty hydraulic hoses is that thy force you to abruptly spend money on applying fixes and hiring additional personnel. This unplanned capital outlay could potentially hurt daily operations and drag production behind as well. So, preventive repair and maintenance will help ensure that you can effectively plan for any expenses and project in a more strategic way. Over time, money is spent, and profitability is enhanced.

Are you looking for replacement hoses in NJ? The Hose Shop provides fabrication, repair and replacement hoses in NJ for machinery that utilize hydraulic hoses and hose accessories. We have 3 convenient locations in the state of New Jersey, though we distribute hoses throughout the entire world. All of the products and equipment that we manufacture are tested to meet today's industry standards.

Reduced downtime

Reduced downtime is one of the most prominent reasons why hydraulic hoses should always be kept in proper shape. In most cases, you have two options; replacing a hose when it fails, or trying to replace it when it fails completely and is unable to work anymore. The latter means that you just have to wait for longer, and this kills productivity as well.

General safety

If you are the type of site manager who cares about the lives and well-being of the workers on the field, then this will appeal to you for sure. Anytime a faulty hydraulic hose leads to the injury of an employee, you get to pay higher insurance fees. A preventive maintenance schedule takes factors such as flammability and temperature levels into account, which will show whether a hydraulic hose repair is the best option before it shuts down completely. All of these ensure that the probability of injury is significantly reduced.

For more information about replacement hoses in NJ, contact The Hose Shop Inc.
Piscataway at 732-562-1000 | Matawan at 732-946-7000 | Branchburg at 908-255-4250.

Thursday, October 17, 2019

Industrial Hoses in NJ

Are you looking for Industrial Hoses in NJ? The Hose Shop is a New Jersey-based company that distributes Industrial Hoses in NJ. Our 101,000 sq ft facility is filled with many different types of hoses for industrial, commercial or residential uses. Our staff has the experience and skills to repair and fabricate the hoses to suit any specific needs.

Our industrial hose inventory consists of a wide range of products that ensure our customers get the right hose for the intended application. The Hose Shop stocks several types of industrial hoses, in the following categories:

For more information on fabrications and repairs for industrial hoses, call us at 732-562-1000.

The Hose Shop - Your trusted source for Industrial Hoses in NJ.