Hose Fitting Dealer in NJ

Are you looking for Industrial Hose Fittings dealer in NJ? The Hose Shope is a proud supplier of a wide-range of Industrial Hose Fittings dealer including FILL-RITE fuel pumps, FILL-RITE fuel transfer pumps, and FILL-RITE fuel meters.

Choosing The Best Hose Fitting For You

There’s a lot to talk about as regards hydraulic hose fittings, but let’s first cover the different connection types:

1. JIC 37⁰ Flares: The Joint Industrial Conference (JIC) fitting is by far the most common connection type, consisting of parallel threads and a 37⁰ cone on the fitting end.

2. O-Ring Face Seals: These ones have flat sealing surfaces that have an embedded seal.the seal mates to the tubing on the hose fittings.

3. O-Ring Boss: The threads of the SAE straight threat O-Ring Boss are just about the same as the straight thread 37⁰ JIC Flare. However, there’s a difference in how they seal, and that’s the biggest distinction between the two.

4. Inch Compression: This is a bite type fitting that is compatible with hydraulic tubing. It doesn’t need much tooling to fit with a hydraulic hard tubing

5. NPT Pipe Threads: They’ve been around for decades, and they’re now available in low-pressure iron and brass, as well as high-pressure steel. These ones work best with process and pneumatic systems.

6. DIN Metric 24⁰ Bite Type: This fitting style is particularly popular in Europe, and it now incorporates an elastomeric seal, thus ensuring improve=d sealing and a reusable fitting.

7. Four-Bolt Flange: They conform to the ISO 6162-1and SAE J51 standards, and they’re best suited for larger sizes and high-pressure assemblies.

When it comes to hydraulic hose fittings, we also have two specific types:

1. Crimp fitting: The use of this will require a crimping press, which will attach the hose to the hydraulic hose fitting.

2. Field Attachable Fitting: The significant benefit that this brings is that a machine doesn’t need to attach the hose to the hydraulic hose fitting. The hose assembly can be made anywhere, as long as the hose and fitting are Field Attachable Fitting compatible.

Now that those are out of the way, here are some factors that can determine the choice of a hydraulic hose fitting:

1. Versatility: When it comes to versatility, the top prize goes to JIC fittings. JIC provides an awesome variety of products to vendors, including long drops, elbows, and both male and female threads.

2. Ready availability: Both NPT and JIC fittings have set the pace for years, and you can easily find them in different varieties and volumes

3. Pressure rating: A lot of parties have started to see 0-ring face seals, thanks to the increase in required pressure ratings. Sadly, both NPT and JIC fittings aren’t rated for higher pressure

4. Desired application: You’ll also need to ensure that you watch the desired application for your hydraulic hose fittings. Factors such as size, temperature, application, media, and pressure should be given proper consideration here.

5. Durability: Another reason why NPT pipe threads are popular in the market is that their leaks can easily be fixed using simple tightening methods. JIC is also quite popular for this, although aggressive wrenching leaves these fittings susceptible to cracks as well

For more information about The Hose Shop, a Industrial Hose Fittings dealer dealer in NJ, call us at (732) 562-1000.

Hydraulic Hoses in NJ

Are you looking for hydraulic hose service in NJ? The Hose Shop provides fabrication and repair for hydraulic as well as many other types of hoses and hose accessories.

The advantage of preventive maintenance

As history has taught us time and again, it’s much better to conduct preventive maintenance than reactive maintenance, this is also true when it comes to hydraulic hoes and other equipment. 

 
One of the most important reasons for this is that preventive maintenance sees to it that your equipment work productively and optimally across an extended period of time when you address potential issues before they develop and negatively impact your system. 

 
Also, as opposed to what a lot of people might believe, you’ll come to find that preventive maintenance provides less downtime, which can be heightened by unexpected system failures and part malfunctions. When you give the proper attention to preventive maintenance on hydraulic hoses, you’re improving its economic value, thus boosting life expectancy and reducing the chances of any safety hazards developing for the hoses as well. 

 
In addition, preventive maintenance will help reduce the cost of repairs and prevent the needs for unnecessary changes. When you have hydraulic hoses and you fail to address potential dangers, you’re setting yourself up to pay more money in the future. Since there are a lot of companies that can effectively handle maintenance services of hydraulic hoses or you, there’s no reason why you shouldn’t take advantage of them.

When to conduct hydraulic hose maintenance

One of the most important components of any strong hydraulic hose maintenance program is to conduct regular inspections of the hydraulic hoses. If you have any stationary equipment, then they should be inspected once a quarter. If your equipment are more mobile, then it is recommended that you inspect them after every 400 hours of use. 

 
Of course, there are some other factors that you’ll need to put into consideration. For instance, if you have hydraulic hoses that are working with equipment which hold severe operating temperatures, then you should inset these hoses even more frequently.

Warning signs of hydraulic hose failure

One of the many reasons why you should hire experiences technicians for your hydraulic hose maintenance is that they know the early signs of probable failure and can address these issues properly. They should be able to check connectors and covers, while also looking out for leakages and ensuring that the hose routing is optimal.

Hose leaks are perhaps one of the most important issues that should be properly checked out. A proper inspection technician will check for leakages in the hose itself, as well as across couplings and connectors. Leaks can simply be identified by checking for liquid puddles, as well as low fluid levels and patches of dirt on the equipment or hose itself. Professionals should be careful to check for leaks using a cardboard piece, as opposed to using their hands. However, if it’s a simple leak, then they could just clean the liquid with a rag and focus more on finding the source of the leak. 

At the end of the day, the point is to track the source of the leak and perform repairs, so such a problem doesn’t repeat itself.

For more information about our hydraulic hose service in NJ, contact The Hose Shop Inc. in Piscataway at 732-562-1000 or in Matawan at 732-946-7000 or in Branchburg at 908-255-4250.

Chemical Hoses in NJ

Tips For Proper Hose Assembly Care

Are you looking for Hose for Chemical plants in NJ for your application? At The Hose Shop we feature a wide line of industrial Hydraulic hoses and industrial hose accessories that solve your Chemical plants hose problem.

 
Safety hoses are especially important in industries where there is a vast movement of gases and liquids across great distances Whether it be chemical hoses, hydraulic hoses, or any other type, one of the most important things to ensure is that the hoses themselves are made from strong and sturdy materials that will help them to function in tough conditions.
 
However, the strongest construction material isn’t enough to make a chemical hose (or really, some other type of hose) function for long and at maximum efficiency. A lot of hose assemblies run the risk of turning into safety hazards when used or applied ineffectively. There is also the risk of them failing to attain full-cycle performance.
 
So, there’s much more that needs to be considered was far as the purchase, operation, storage, and maintenance of these hoses are concerned.
 
Here are a few simple tips that can help you improve the way you care for your hose

Identification marks to help you make a quality purchase

A safety hose assembly is usually designed to meet a specific purpose. SO, before you make a purchase, make sure that you look out for the following:

1. The size: This includes the length of the hose and its inner diameter

2. The type of connection ends it uses

3. The intended use: Of course, this is the use for which the hose has been built. A chemical hose has a different use from a hydraulic hose, and you need to be aware of that distinction

4. The temperature: This looks at the maximum temperature that a hose could possible withstand

5. The conduit material: it’s also important to ensure that a specific hose is able to move a type of material. Chemical hoses move chemicals, while others have their ideal conduit materials

6. Pressure: You should check the right amount of pressure that a hoe can withstand without cracking

7. Make sure to look out for the delivery date on which the hose was shipped or produced

Hose operations

Most hose assemblies have also been manufactured to fit specific specifications. These tips will help you use their services optimally:

1. The application of the hose should follow the maximum pressure limit for it. Essentially, the hose should be made to operate below the maximum working pressure. If, for some reason, you need to change the pressure, then you should do it slowly. Surge pressures could damage the hose

2. There should be a hose inspection plan in place a hose handler should be ready to perform a basic inspection of the hose before it is put to use. Appropriate steps should also be taken to address damages

3. Hose assemblies should be inspected and tested at least once in 6 months. This will ensure that they adhere to OSHS, LPGA, RMA, ASTM, and NFPA standards

4. Chemical compatibility and hose material should also be confirmed with reference charts

5. Hoses should never be dragged over abrasive and sharp surfaces

6. Avoid running over a hose with any equipment

For more information about Hose for Chemical plants in NJ, call The Hose Shop at (732) 562-1000. Contact The Hose Shop today and we'll give you a quote on the Chemical plants hoses you need.